C-Tec CFP Ancillaries

C-Tec Spare key for CFP Main and Repeater panels

Flush mounting bezel (for XFP 32 zone masters & repeaters)

The BF318 is a high quality remote LED indicator specifically designed for use in fire alarm systems. It incorporates a high intensity, wide-angle red LED which is clearly visible from the front of the plate when active.

BF365IM Sounder isolator module (Max. 35 per BF365SC). BSI certified to EN54 parts 17 & 18 when used in conjunction with the BF365SC

BF365SC Sounder isolator controller, supplied on a double gang plate. ?BSI certified to EN54 parts 17 & 18 when used in conjunction with BF365IM modules.

The BF366 is a double-pole 24V 5A polarised relay specifically designed for use in 24V fire alarm systems. It includes a key switch isolation facility allowing the relay operation to be temporarily disabled from the fire alarm signal during routine test and maintenance (to prevent auto diallers, water sprinklers, roller shutters, etc., from activating).

BF376 Auxiliary device isolator, supplied on a single gang plate. Allows a 24V d.c. output from a fire panel to be remotely isolated, ideal for preventing autodiallers, rollershutter doors, etc., from accidentally triggering during routine maintenance.

The BF376 is a general purpose, double-pole, polarised 24V 5A relay designed for use in 24V fire alarm systems. It incorporates a high intensity LED which illuminates red when the relay is active. It may be connected to a suitable control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets, roller shutter doors, etc.

The FF502P provides four extra sounder circuits with open and short circuit fault monitoring. It is compatible with most fire alarm control panels and is supplied mounted on a doublegang plate which fits standard UK 25mm deep back boxes.

EN54-13 Interface Board. Requires 2 x BF355 monitoring modules

EN54-13 Sounder Circuit Fault Monitoring Module

Document/Key Box (W450 x H345 x D94mm)

C-Tec Ancillary fire alarm equipment box (external size 380x235x90mm)

C-Tec Ancillary fire alarm equipment box (external size 465x290x103mm)

C-Tec Barrier interface unit (for use with intrinsically safe detection devices)

C-Tec Ancillary fire alarm equipment box (external size 404x404x110mm)